LTT SLC-M+ Series, Руководство пользователя, Страница: 92 / 113

Chapter 3 Operation
91
Parts Selection:
Under this function, you can choose the pieces you want to do or by
pass.
One Point Matrix:
Under this function, AUTOCCD will take only one point for calibration
for every piece.
With its sub-function [Input Angel], then enter the angel in [
Degree] to
specifies the default rotation angle.
With its sub-function [Allow Retry] to retry calibration or bypass the fail piece.
Under the calibrate function
, you will get the shorter working time.