LTT SLC-M+ Series, Руководство пользователя, Страница: 73 / 113

Chapter 3 Operation
72
4
:7
Resolution
(This function is for Engrave, not applicable for SLC-M+)
Engrave type
(This function is for Engrave, not applicable for SLC-M+)
Cut & Engrave Setup
The Cut & Engrave Setup section allows the user to enable and disable certain
functions of the machine. If the box next to Cut is unchecked the machine will
disregard any potions of the graphics that instruct the laser to vector cut. E ngraving
mode is not supply at this time. For more precise control the boxes below each color
allow the user to disable the cut options independently for each color.
By Color
When
[By Color]
is selected vector are cut according to the predefined color order.
And vectors of the same color are cut in the sequence they have been drawn.
By Drawing
When
[By Drawing]
is selected all vectors are cut in the sequence in which they
have been drawn, regardless of color.