LTT SLC-M+ Series, Руководство пользователя

Страница: 103 / 113

Chapter 3 Operation
102
Outer Radius Outer radius setting.
Accept Thresh
The minimum limit for the CCD find the matched circle
between inner radius and outer radius. You can adjust
the level for different image.
#1 Center
Score The score for the CCD find matched circle between
inner radius and outer radius.
#2 Center
Score The score for the CCD find matched circle between
inner radius and outer radius.
3.8.5 Set the Default Job
When AutoCCD connects to the CCD, it will use the present job in In-sight explorer.
If In-Sight Explorer does not be executed, AutoCCD will load the default job.
This section will explain how to setup a job to be the default job.
1. Connect to the CCD.
Please make sure the job you want to set as a default job is in the CCD device. You
can check it from the
[In-Sight Files]
. You can see display or hide it by pressing
Shift + Ctrl + 2
.
3. Click
[Sensor]
->
[Startup…]
4. Select the job you want to be set as the default job. Then, press
[OK]
. The setting
will take effect after CCD restarted.