LSIS H100, Руководство по эксплуатации

Страница: 309 / 610

295
Learning Advanced Features
St art Freq 1
St art Freq 3
Out Freq
High Freq
M1 OutFreq
M2 OutFreq
St art Freq 2
M3 OutFreq
M2, M3, M1
Run Cmd
FeedBack
PI D Reference
M1 Cmd Freq
PID Ctrl
M2 Cmd Freq
M3 Cmd Freq
Main Motor
PID Ctrl
PID Ctrl
Aux Motor
Aux Motor
PI D Output
PI D Limit High
More t han 1min Less than 1min
M2, M1
Pr iority at the moment
M2

M1

M3
Init ial Priority
M1

M2

M3
Pr iority at the moment
M2

M3

M1
M1
St op Freq 1
St op Freq 3
M2, M3, M1
[Aux Stop DT]
M2, M3, M1
M3
M2
M2, M3
t
Main Motor
Aux Motor
Aux Motor
Main Motor
The conditions that Aux Motor is turned on and off are same as the description of Multi Master
Mode and Multi Follower Mode.
5.44.8.4 Master Follower Interlock
As Interlock signals are sent from Serve Drive, Leader Drive puts together through Communication
Line. Every Trip such as HAND State or OFF State of Serve Drive is processed by Interlock in Leader
Drive .
This is, other Server Drives keep performing Master Follower function except the cases that it is in
HAND/OFF State or there are trips
If Leader Drive is HAND State or OFF state, Master Follower system is not activated.
In case that Pipe Broken and Interlock Trip are caused in Leader Drive, every drive operating is
stopped and Master Follower keeps performing the function except Leader Drive if there is another
Trip.
(Leader Drive executes PID control and overall system control consistently.)