LS tractor MT7101, Руководство оператора, Страница: 86 / 292

3 - 16
29 Fuel level gauge
 This gauge shows the fuel level in the fuel tank. If the needle indicates “
E
”, fill the fuel tank
immediately with fuel.
 The gauge activates when the key switch is in the ON position. It will register “empty” with the key
switch in the OFF position.
30 Engine coolant temperature gauge
 This gauge indicates the engine coolant temperature during operation. It activates when the operator
turns the key switch to “ON” position. The gauge will register cold with the key switch in the OFF
position.
 The closer the needle approaches “
H
” mark, the higher the engine coolant temperature is. If the
needle moves to red portion of the gauge, this indicates an overheated condition. Stop the engine
immediately and check the problem.
 Engine coolant is very hot. When checking the coolant,
comply with the instructions of the chapter 5-
12-(1), “Replacement of Engine coolant” in this manual.
27
28
29
30
28 Fuel filter warning indicator
 When there is a restriction or excess water in the
fuel filter, this indicator will be turned on.
Remove water in the fuel filter.
(See chapter 5-5-
(1) in this manual)
27 Engine oil pressure indicator
 The light indicates oil pressure only and goes
out when sufficient oil pressure is present at the
oil sender.
 This indicator will be turned on when turning the
key switch to “ON” position and it will be turned
off after starting engine.

If the indicator is turned on during operation,
stop the engine immediately and check the
engine oil level. If the engine oil level is normal,
contact your authorized local dealer for checking
the engine lubrication system.