LS tractor MT7101, Руководство оператора, Страница: 124 / 292

3 - 54
(7) Beacon lamp switch (Roll-bar
type, if fitted)
 It is used to turn on/off the beacon lamp
connected to the beacon connectors.
 The beacon connectors are installed on the rear
steel plate of the driver’s station for roll-bar
models.
 Press the upper side (symbol part) of the switch
to turn on the beacon lamp.
Beacon lamp switch
Beacon connector
Roll-bar
Roll-bar
Passenger’s seat
Warning
▶
This passenger’s seat is an application for training or education about the tractor.
DO NOT ride people on the passenger’s seat while driving on the road.
(6) Passenger’s seat (Cabin type,
if fitted)
 This passenger’s seat is installed in front of the
left-hand fender for the purpose of education or
training.
 Before seating on this seat, be sure to check the
suspension system is locked in place.
 Always wear the seat belt and adjust the belt to
fit to your body.
1. Insert the seat belt end into the buckle until a
“click” indicates it is properly engaged.
2. To remove the seat belt from the buckle,
press the red release button on the buckle.
 Check the seat belt regularly. If damaged or
frayed, replace it with a new one.
Seat belt Buckle