
1 - 37
19. Location : On the left-hand cabin front
cross beam. (cabin models only, optional)
- CAUTION.
- Height limit: 6ft, Weight limit: 200lbs.
- Always wear your seat belt.
- Be careful of disturbing driver / operator.
- Caution of door latch while buddy seat in use.
- Failure to comply could result in death or
serious injury.
- Part number : 40417249
20. Location : On top of the left/right-hand rear
mud guard.
- WARNING
- Avoid injury !
- Activate the external hydraulic control switches
only while standing to the side of the machine
(outboard of the tires).
- DO NOT stand on or near the implement or
between the implement and machine.
- Failure to comply could result in death or
serious injury.
- Part No. : 40269462
21. Location : On the right-hand door glass for
cabin models, on the front side of the left-
hand fender for roll-bar models.
- CAUTION
- If lamp
①
is blinking with DTC code 11738
(2DDA), the engine is requiring removal of SOx
in SCR. Follow the below steps to DeSOx.
1. If lamp
②
is on, make high RPM and load to
increase exhaust gas temperature for removal of
HC until lamp
②
is off.
2. Make three safety conditions.
- F/R Neutral & Parking Brake & PTO Off
3. Press Regen switch for more than 3 seconds.
Note: If Regen switch is pressed more than 10
seconds, ECU can set a fault and Inhibit.
- If DeSOx can not be worked due to other fault,
request LS service team.
- If you must stop DeSOx, press Inhibit switch
and keep idle RPM for at least 5 minutes to
protect ATS.
NOTE: Inhibit can be thermal stress on ATS.
- Part No. : 40437066
Содержание MT7101
