
5 - 58
< Do not charge the attached battery>
< when connecting the charger >
③
Notices in charging the battery using separate charger
As the battery fluid makes poisonous gas which can explode during the charging, comply with the
following instructions.
1. Detach battery from the tractor.
2. Wait until the battery is warmed to room
temperature.
3. Connect the cable of charger to the (+), (-)
terminal of the battery correctly.
- Connect (+) charger cable to (+) battery
terminal. : Red color
- Connect (–) charger cable to (–) battery
terminal. : Black color
4. Plug in charger cord.
5. Charge battery with a “SLOW CHARGE”.
6. Check the charging current and temperature of
electrolyte during the charging.
7. Unplug charge cord and remove charger cables.
8. Attach battery to the tractor.
▶
Put on eye protection and globes to protect human body from poisonous sulfuric
acid before handling the battery .
▶
Always remove grounded (-) battery clamp first and assemble it last. If not, it can
cause explosion by spark.
▶
Keep all flames and sparks away and DO NOT smoke while charging the battery.
▶
Detach battery from the tractor before charging. DO NOT charge directly while the
battery is attached to the tractor.
▶
Turn off or unplug the charger cord, before connecting or disconnecting the charger
cable to or from the battery.
▶
Charge the battery in an area with good ventilation.
▶
Do not charge the frozen battery.
▶
Use the rated 12V-5A charger.
▶
Never check battery charge by placing a metal object across the terminals.
Caution
Содержание MT7101
