LS tractor MT7101, Руководство оператора, Страница: 83 / 292

3 - 13
ⓗ
Speedometer
 Current vehicle speed is displayed in km/h or
mph(mile/h) unit. This is theoretically calculated
from the tire rolling circumference and the
display unit can be changed as below.

Changing Unit(km/h

mph, mm

inch)
:
1. Turn off the engine, and apply the parking brake.
2. Entering edit mode
: Turn key switch to “ON”
position with pressing the upper side of the ESC
main switch. At this time, the “
Tire RC Setting
”
will be displayed.
3. Press the upper side of the ESC main switch
shortly(within one second). The units of the tire
rolling circumference and vehicle speed will be
changed.
4. Editing tire rolling circumference
: In edit mode,
the first digit will blink at first. If pressing the
upper side of the ESC speed up/down switch,
the next digit will blink. If pressing the lower side
of the switch, the number is changed from ”9” to
“0” each time when you press.
5. If pressing the upper side of the ESC main
switch for over two seconds, your data will be
saved and the edit mode will be exited. If
pressing the lower side of the ESC main switch
or turn key switch to the “OFF” position, your
input data will not be saved and the edit mode
will be exited.
Speedometer
ⓖ
Transmission gear ratio
 Current transmission gear ratio is displayed.

If you change the gear ratio, the target gear ratio
is displayed by a continuous light and the
current gear ratio will be blinked.
Gear ratio
Current gear ratio Target gear ratio
ESC main switch
ESC speed
up/down switch
Speedometer
Tire RC
Setting mode