LS tractor MT7101, Руководство оператора, Страница: 182 / 292

4 - 30
(6) Adjusting Wheel tracks and
tire replacement

If the front wheel track is adjusted, check the
clearances between tires and tractor body case
by case. If necessary, the steering angle must
be adjusted.
(See chapter 4-5-(8) in this manual.)

When adjusting rear wheel track, check the
radial and lateral clearance between rear tire
and tractor chassis as below.
- A : 60mm (2.4 in) (Minimum)
- B : 40mm (1.6 in) (Minimum)
Depending on rim or disk type, the front and rear
wheel tracks may vary.

The combinations of the front & rear wheels are
as below
“ B ”
“
A
”
Fender
①
Front wheels
- 12.4-24 8PR, Rim & disk(W10x24)
- 12.4-24 8PR, Rim & disk(W10x24)
②
Rear wheels
- 18.4-30 8PR, Rim & disk(W15x30)
- 16.9-34 8PR, Rim & disk(W15x34)
▶
When adjusting the wheel track, pay attention to the direction of tire lugs. For
agricultural tires, if it shows “/\” shape when looked behind, it is correct.
▶
Actual settings may vary depending on the brand of the rim and type of tire.
Notice
▶
The tractor wheels are very heavy, PLEASE BE CAREFUL.
▶
When removing the wheels, proceed with extreme caution, use a suitable hoist and
specific equipment to move the heavy parts.
Warning