LS tractor MT7101, Руководство оператора, Страница: 74 / 292

3 - 4
10 Engine idle rpm increase indicator
11 PTO operation indicator
 When the key switch is “ON” and PTO mode switch is “
MANUAL
” and PTO switch is “ON” position,
this indicator will be turned on.

If the PTO mode switch is “
AUTO
”, rear PTO and this indicator will be turned off to protect the PTO
drive shaft when clutch pedal is depressed or the implement is lifted up over the specified limit.
12 4WD indicator

When pressing 4WD switch to “4WD” position, this indicator will be turned on.
 When pressing brake pedals, 4WD will be engaged automatically to brake the front wheels, and this
indicator will be turned on.
13 Air cleaner service indicator
14 Brake pedals not latched indicator (Not used)
 If engine speed is needed to be increased for
normal after-treatment process, and parking
brake is applied, the engine low idle will be
increased automatically and this indicator will be
turned on.
 If the parking brake is not applied, this indicator
will blink.
 If the air cleaner element is clogged, and the differential pressure is increased, this indicator will be
turned on. After stopping the engine, clean or replace the filter element with a new one.
 This indicator is not used in this model.
10
13
14
12
11
8
9
8
Coolant over-heat warning indicator
9
540E PTO operation indicator
 If the engine coolant temperature goes over the
critical level, this indicator will be turned on. Stop
and cool down the engine immediately.
 If not cleared, contact your authorized local
dealer for check.
 When PTO gear lever is 750/540E rpm, and
PTO switch and 540E PTO switch are “ON”
position, this indicator will be turned on, and the
engine maximum speed will be restricted in this
mode.