LOYTEC L-Gate, Руководство пользователя, Страница: 72 / 113

L-INX/L-GATE User Manual 72 LOYTEC
Version 7.2 LOYTEC electronics GmbH
Download and the product selection for L-LOGICAD. After the driver installation has
completed, plug in the USB key. It must be recognized as a mass storage device (the details
on it show the location ‘CodeMeter-Stick’). When starting logiCAD it recognizes the
hardlock automatically.
If the driver installation failed, or the USB key was not detected or connected, the window
shown in Figure 53 will be shown when logiCAD is started. In this case plug in the hardlock
stick, wait for Windows to recognize it and then click
Find Dongle .
Figure 53: logiCAD Product Activation with Hardlock
Note: logiCAD checks frequently if the USB key is present. When unplugging the USB key, even if
logiCAD was successfully started, all major features are automatically disabled. But there is
no additional message for the user!
8.3 IEC61131 Project Files
In the L-INX Configurator select the LogiCAD Files tab to attach an IEC61131 program and
a logiCAD project to the L-INX project. The tab is shown in Figure 54.
If there is an IEC61131 program attached to the project, every time a new configuration is
downloaded to the device, the L-INX Configurator asks, if the attached program should be
downloaded as well. This way, no logiCAD is required to download a suitable IEC61131
program in a separate step. The project designed in the L-INX Configurator can hold all
necessary information to set up a running device:

IEC61131 data point configuration,

Data point configuration in the LINX,

Required connections,

IEC61131 program.
The logiCAD project directory can also be attached to the L-INX configuration file, in order
to include the logiCAD project sources from which the program was compiled.