L-INX/L-GATE User Manual
73
LOYTEC
LOYTEC electronics GmbH
Figure 54: IEC61131 Project Files.
To attach an IEC61131 program or a logiCAD project select the file/folder to attach. The
selected data will be attached automatically the project. It can be restored to disk by pressing
the
Restore to Disk
button. During the development process the attached data may change
several times. To update the attached data, located on the before provided path, press the
Refresh
button.
Every time a logiCAD project is successfully compiled, the file MBRTCode.so, the compiled
IEC61131 program, is copied to the
public
directory of the device resource for which the
program was compiled. Select this file to attach it to the project of the Configurator. Note
that the time and date of the file indicates the time of the last code generation. If logiCAD is
not able to build a new program, the old file will not be deleted.
The project will be scanned for device resources and the available devices will be listed in
the dropdown box called
Device Config
. Select the desired device and press the button
Attach Program
to automatically attach the correct MBRTCode.so file.
8.4 Working with logiCAD
This section provides all necessary background information how to use the L-INX with
logiCAD. For using the L-INX with logiCAD, a predefined project template for the L-INX
must be used. Hence, when creating a new project, select the project template “Project for
LINX-110”, see Figure 55. For additional information how to create, delete and manage
projects please refer to the logiCAD online help.