L-INX/L-GATE User Manual
51
LOYTEC
LOYTEC electronics GmbH
5.2.3 BACnet Configuration
To configure the BACnet interface, at least the Device ID and the Device Name must be
configured (see Figure 30).
Figure 30: BACnet Device Configuration.
The device ID corresponds to the instance number of the BACnet device object. It must be a
unique ID on the BACnet internetwork. Also the Device Name must be a unique name on
the BACnet internetwork.
By default the BACnet/IP data link layer is used. If the device shall be used with the BACnet
MS/TP data link layer, please refer to the LOYTEC Device User Manual [1] for further
information.
On devices with an LCD display, the BACnet device ID can also be configured over the LCD
UI.
To Configure the BACnet Device ID over the LCD Display
1.
On the LCD main screen navigate to
Device Settings »»
.
2.
Then navigate to the menu
BACnet »»
.
3.
In that menu navigate to the
ID
input for entering the device ID. The field is split into
two controls, one for the thousands and one for singles, to simplify entering big numbers.
4.
After the device ID has been entered the device name is automatically assembled using
that device ID, if no other name has been configured on the Web UI.
5.
On a BACnet router navigate to the
BAC/IP Net
menu item and enter the BACnet
network ID of the BACnet/IP network. Then choose the appropriate
MS/TP Net
number
for each available MS/TP port. To disable the router port, scroll down till
off
appears.
6.
To let the changes take effect, the device needs to be rebooted. For doing this now you
may select the menu item
Save and reboot
.
5.2.4 License Activation
On the L-INX devices certain features must be activated by entering a license PIN code on
the Web interface or the LCD UI. This license PIN code is entered only once and remains on
the device for its lifetime.