L-INX/L-GATE User Manual
37
LOYTEC
LOYTEC electronics GmbH
Figure 19: CSV export dialog with configurable columns.
Override Function for Data Points
The data point model in LOYTEC devices has been extended with a manual override
function. On the Web interface and on the LCD display data point values can be overridden
to manual values. If an override value is set, the running control logic no longer affects the
data point value, neither does network communication. The override value is in effect until
it is removed again by the user.
Figure 20: Overriding a data point on the Web interface.
WLAN Mesh Configuration
The Mesh Point mode has been extended by a whitelist function. This allows configuration
of a Mesh network with up to 32 nodes. The whitelist contains all mesh point IDs that may
contact each other. In order to make configuration of the mesh network easier, the Quick
Wireless Setup has been added, which allows a first mesh setup in only a few steps. For
optimizing the whitelist the Web interface offers a graphical editor, which makes changes
quick and simple. On device models with an LCD display the wireless setup can also be
completed using the jog dial. For more information on how to set up a Mesh network please
refer to the respective Sections of the LOYTEC Device User Manual [1].
Alarm Messages
The length of alarm messages has been extended to 250. This increased length comes in
combination with a new %{path} variable placeholder that can identify the data point path
in alarm messages. This is beneficial for mass-engineering alarm conditions on data points