Lorex LNC104 Скачать руководство пользователя

Страница: 140 / 155

126

Configuring Camera Settings using a Web Browser

recordings saved on the microSD card, use L-View or the iPhone, iPad, or Android apps.

To configure microSD card recording:

1. Make sure a microSD card (not included) is inserted into the camera. It is

recommended to format the microSD card before using it with the camera.

2. Select one of the following recording options:

• Always Recording: Record continuously, all the time to microSD card.

• Schedule Recording: Record according to the settings set in the Schedule.

• Disable Recording: Do not record.

3. Under

When disk space full

, select

Overwrite

for the camera to record over the

oldest recordings when the microSD card is full or select

Stop recording

for the

camera to stop recording when the microSD card is full.

4. Click

Save & Apply

7.4.4 SCHEDULING (CONFIGURING RECORDING AND ALARM
SCHEDULES)

Configure schedules for recording and alarms. Schedules can be configured separately

Select Recording
option

Select overwrite or
stop recording
when the microSD
card is full

Содержание LNC104



























































































































































Результаты поиска

Содержание LNC104

Отзывы:

Похожие инструкции для LNC104

Бренды по названию

Популярные бренды

Lorex LNC104, Руководство пользователя

Результаты поиска

Содержание LNC104

Отзывы:

Похожие инструкции для LNC104

Бренды по названию

Популярные бренды