Lorex LNC104 страница 122 Скачать руководство пользователя

Страница: 122 / 155

108

Android App

•

Scheduling:

Create audio alarms based on the settings set in the Schedule.

7. Tap

Alarm Test

to sound a test alarm.

8. Tap

Update

to save your settings.

6.3.12 ENABLING MICROSD RECORDING

Configure video recording to the microSD card (required; not included). To playback
recordings saved on the microSD card, use L-View or the iPhone, iPad, or Android apps.

To configure microSD card recording:

1. Make sure a microSD card (not included) is inserted into the camera. It is

recommended to format the microSD card before using it with the camera.

2. In Camera List, tap

next to the camera you would like to edit.

3. Tap

Camera Settings

4. Tap

Schedule

then

SD-Card

5. Under Recording, tap to select

to enable microSD recording or

OFF

to disable.

6. Select one of the following recording options:

•

Always Recording:

Camera will record continuously at all times.

Enable/disable microSD recording

Select always recording or schedule
recording

Select Circular recording to overwrite
oldest recordings when microSD card
is full or Stop recording to stop
recording when microSD card is full

Содержание LNC104



























































































































































Результаты поиска

Содержание LNC104

Отзывы:

Похожие инструкции для LNC104

Бренды по названию

Популярные бренды

Lorex LNC104, Руководство пользователя

Результаты поиска

Содержание LNC104

Отзывы:

Похожие инструкции для LNC104

Бренды по названию

Популярные бренды