51
Using the Main Menu
Device
The Device menu allows
you to configure hard drive
and PTZ settings and
format a USB flash drive
(not included).
• For details on connecting PTZ cameras
(not included), see “Appendix B:
Connecting a PTZ Camera” on page 106.
Configuring Hard Drive settings
To format the hard drive:
1
Select the
HDD
tab.
2
Click the checkbox under
Select
to choose
the drive you wish to reformat.
3
Click
Format HDD
.
4
When the warning window appears, click
OK
. Wait for the system to format the hard
drive.
To set the hard drive recording mode
(loop recording or linear recording):
1
Select the
HDD
tab.
2
Select the checkbox beside the hard drive
you wish to configure.
3
In the
Overwrite
drop-down menu, select
Auto
(recommended), or select the desired
duration the hard drive should retain its
data.
NOTE:
If overwrite recording is enabled, the
system’s hard drive automatically
re-writes the hard drive’s oldest
content (first in first out).
4
Click
Apply
to save your settings.
Formatting USB Flash Drives
1
Insert a USB flash drive (not included) into
one of the USB ports.
2
In the main menu, click
Device>HDD
.
3
Click
Format USB
, then click
OK
. Wait for
formatting to complete.
ATTENTION
: Formatting the HDD
erases
all data
on the hard disk.
This step cannot be undone.
ATTENTION
: Formatting a USB flash
drive erases
all data
on the drive.
This step cannot be undone.
Содержание LH150
Страница 16: ...xiv...