LOGICLINK - MANUAL // PAGE 31
10 ADDITIONAL INFORMATION
10.1 API
The LOGIClink API allows you to create customized applications using the LOGIClink. Contact LOGICDATA
for further details.
10.2 SOFTWARE-DEPENDENT FUNCTIONS
A full list of Software-Dependent Functions can be found in the Operating Manual of the installed Control
Box, or the DYNAMIC MOTION system Manual, depending on your chosen configuration.
10.3 DISASSEMBLY
To disassemble the LOGIClink, ensure that it has been disconnected from the mains. Then, follow the assem-
bly instructions in reverse order.
10.4 MAINTENANCE
The LOGIClink is maintenance-free for its entire service lifetime. To clean the LOGIClink, wipe the housing
with a soft, dry cloth.
WARNING Risk of death or serious injury through electric shocks and other hazards
Using LOGIClink alongside unauthorized spare or accessory parts may lead to death or
serious injury through electric shocks and other hazards.
• Only use accessory parts produced or approved by LOGICDATA
• Only use replacement parts produced or approved by LOGICDATA
• Only allow Skilled Persons to perform repairs or install accessory parts
• Contact customer services immediately if the system malfunctions
The use of unauthorized spare or accessory parts may cause system damage. Warranty
claims are void in this scenario.
10.5 TROUBLESHOOTING
A list of common problems and their solutions can be found in the Operating Manual of the installed Control
Box, or the DYNAMIC MOTION system Manual. Most problems with the LOGIClink can be fixed by perform-
ing a Restart (Chapter 8.2). If you require further support, contact LOGICDATA.
10.6 DISPOSAL
All LOGIClink products are subject to the WEEE Directive 2012/19/EU.
• Dispose of all components separately from household waste. Use designated collection
points or disposal companies authorized for this purpose
