LOGICDATA LOGIC OFFICE Series, Руководство пользователя

Страница: 30 / 32

LOGICLINK - MANUAL // PAGE 30
Version B (Auto-Movement Enabled):
INFO The Auto-Movement function is available only for Table Systems sold in US markets.
INFO If you press anywhere on the screen while the table moves to a Memory Position, the
Table Top will stop moving immediately. To continue, you must select the Memory
Position again.
CAUTION Risk of minor or moderate injury through unauthorized modifications
The firmware is delivered with a deactivated auto-movement function. If you activate
this function, the grading of the safety functions according to EN ISO 13849-1 PL b,
Category B, are no longer valid, as the legal requirements in the standard are no longer
met.
• If you activate the function, perform a new risk new assessment to meet the higher
safety requirements (EN 60335-1). These cannot be met by LOGICDATA systems.
• LOGICDATA is not liable for injuries or damage caused by activating the double-
click function
Go to the "Settings" Menu and enable Auto Movement
On the home screen, tap the Memory Position you wish to move to
Wait until the Memory Position has been reached
1
2
1
2