LOGICLINK - MANUAL // PAGE 16
4. (Not applicable for LOGIClink Lite). Align the Presence Sensor to the desired user position. If
the LOGIClink will be on the user's right-hand side, turn the sensor towards "R". If the LOGIClink
will be on the user's left-hand side, turn the sensor towards "L".
Fig. 5:
Aligning the Presence Sensor
6.3.3 COMPLETING ASSEMBLY
After the LOGIClink is attached to the Table Top, you must connect it to the Control Box or DYNAMIC
MOTION system. Refer to Chapter 7 for instructions.
