SPACE 2000 EVO/N (T and M versions) OPERATION MANUAL
33
CIRCULAR FLANGE
This function can be used to make a series of holes arranged on a circumference.
Let us suppose, for example, that it is necessary to make 4 holes arranged on a
diameter of 100 mm
.
Key
64
C E n t E r
X
The instrument will indicate that the Carriages have to be moved until they reach the
centre of the circumference
Key
d i A M E t E r
X
Input a value of piece diameter. For example 100 mm.
Key
100
S t. A n G
X
Input a value of initial angle (degrees and hundredths of a degree). For example 0°.
Key
0
n r. P n t.
X
Input a value of numbers of holes. For example 4.
Key
4
- 5 0. 0 0
X
0. 0 0
Y
At this point, the program has been completed. To store it in memory location 0 (the
locations are numbered from 0 to 9) proceed as follows:
Key
0
F L G 0
X
