SPACE 2000 EVO/N (T and M versions) OPERATION MANUAL
25
To enable this function, proceed as follows:
Key
31
S E G.C. no
X
press
+
-
To select
S E G.C. yes
X
press
The
display
proceed
to
examinate the next axis, i.e.:
S E G.C. no
Y
Complete the selection on every axis of the readout (X,Y,Z and W).
In order to program the initial point of each segment, proceed as follows:
press
During the selection of the current
axis, ex. X
1 2 3 . 4 5
X
Place the axis in the initial point of
segments, “Point 0” (ex. 500 mm).
5 0 0 . 0 0
X
press
The display will reset
Place the axis in the final point of the current segment, “Point 1”.
In our case, make a displacement
of 40mm
4 0 0 . 0 0
X
Inserire il valore di spostamento reale misurato
In our case the real value is:
400.20mm.
4 0 0 . 2 0
X
press
The display will reset. Place the
axis in the final point of the next
segment.
5 0 . 0 0
X
Then insert the real measured value of displacement, or press EXE to confirm the
displayed value.
In our case the displacement corresponds
to the displayed value
5 0 . 0 0
X
