SPACE 2000 EVO/N (T and M versions) OPERATION MANUAL
41
-
3 0. 0 0
Y
Move X and Y axis up to the point X = 0,00 e Y = 0,00 (point 4) and drill the fourth hole.
To come back to one of the previous holes (ex. from the position 4 to the position 3) :
Press
To recall the position of X and Y
in memory n. 12
0. 0 0
X
-
3 0. 0 0
Y
In order to repeat the same working again, place a new workpiece:
Press
Axis show the distance to reach
point 1
5 0. 0 0
X
0. 0 0
Y
Move X and Y axis up to the point X = 0,00 e Y = 0,00 (point 1) and drill the first hole.
Go ahead with the following drills for all workpieces.
After completed the workpieces:
Press
To quit the function
1 2 3. 4 5
X
NOTES:
1 .It is possible to store memory blocks from 0 to 999.
2.
In order to modify memory blocks, insert new positions when
programming.
3.
It is not allowed to insert memory blocks inside a working program. If
necessary, store it again starting from a memory block not used yet.
4.
It is not possible to eliminate all the blocks of a complete program. If
necessary, use those blocks for storing a new program.
