SPACE 2000 EVO/N (T and M versions) OPERATION MANUAL
16
RESETTING/PRE-SETTING A DIMENSION
Regardless of the selected counting mode, ABS or INC, resetting of a datum
is obtained by proceeding as follows
X
and/or
Key
and/or
and/
or
1 2 3. 4 5
Y
and/or
The LEDs of the activated Axes will flash
Z
X
and/or
press
and the datum will be reset
0. 0 0
Y
and/or
Z
To enter a (pre-set) datum, for example 113.03, on the Y Axis:
Key
113.03
1 2 3. 4 5
Y
press
1 1 3. 0 3
Y
If the same datum has to be entered for more than one Axis, for example
100.05 for both Axes X and Z, proceed as follows:
Key
100.05
1 0 0. 0 5
X
and
Z
press
and the datum will be
reset
1 0 0. 0 5
X
and
Z
ON EACH DISPLAY THE DATA CAN BE ENTERED:
A.
without the trailing zeros
which are not important:
1250
1 2 5 0. 0 0
B.
with a number of
pertinent decimal digits:
1133.04
1 1 3 3. 0 4
