SPACE 2000 EVO/N (T and M versions) OPERATION MANUAL
48
100 ORIGIN OF THE AXES
This function can be used (in the
ABSOLUTE
counting mode) to store up to 100 positions
for starting to work (origin 0-99). These origins are related to the
REF
of the rulers and
can always be traced, even after a power outage.
Let us suppose that several origin points have to be set and stored.
Switch the counting system to ABSOLUTE (See. Page 15).
Make a search for REF and position the Carriages on the first work origin
Key
1
O r G 1
X
and enter the chosen origin number (for example 1).
To call up previously stored points of origin, proceed as follows:
Key
1
O r G 1
X
and position the Carriages at dimension 0,00 and continue machining.
In the event of a power failure, find REF and continue as above.
