LNS SERVO S3 T, Инструкция по эксплуатации

Страница: 64 / 120

62 CHAPTER 6: GENERAL DESCRIPTION
QUICK LOAD SERVO S3T
5. PUSHER
5.1. Description
Three pushers are provided to cover the entire bar feeder range. Each pusher has a defined range of
use:
Pusher diameter Item no. Range covered
**6.35 mm (1/4") *021.011.022 / 6 6 mm - 15 mm (1/4" - 1/2")
12 mm (1/2") *021.011.062 16 mm - 32 mm (>2/3" - 1 1/4")
25 mm (1") *021.011.022 / 25 33 mm - 120 mm (>1 1/4" - 4.7")
*
This number corresponds to the complete pusher, with all the elements indicated below. When a
pusher is ordered for the first time, use this number.
**
2 supports with additional rollers, designed to provide better support for small diameter bars, are
supplied with pushers with a diameter of 6.35 mm. Their positions on the loading table will be defined by
the length of the bars to be loaded.
5.2. Layout of the elements
Des.
6,35 (1/4") 12 25
Description
Item no. Item no. Item no.
A -* -* - Pusher body
B -* -* 914.06.06 Retaining screw
C -* -* 011.07.444 Tip
D 011.07.234 011.007.184 011.07.014 Mechanical stop
E 021.05.244 021.05.164 011.007.194 Guiding bushing
A+B+C **021.011.074 **021.011.294 **021.011.304 Pusher
*
On 6.35 and 12 mm pushers, parts A , B and C are welded.
**
This number is used when the bar feeder is already equipped with elements (D) and (E) .