LNS SERVO S3 T, Инструкция по эксплуатации

Страница: 60 / 120

58 CHAPTER 6: GENERAL DESCRIPTION
QUICK LOAD SERVO S3T
2. LOADING TABLE
Please read the safety instructions provided at the beginning of this manual before
handling the following devices.
2.1. Description
When they are on the magazine, the bars (A) press against the loading stops (B) . The stops are arranged
on an axis (C) which is coupled to the loading table (D) . The stops are adjusted automatically by the
electric motor M2, at the same time as the loading table is configured.
The bar feeder loading table performs two functions
1. Selection of the material
When the table (A) is in the lowered position, the pusher (B) is opposite the spindle (C) .
The pneumatic cylinders are active, the table is raised and selects the bar (D) which is
pressing against the stops (E) on the bar magazine.
2. Guiding of the material:
When in the raised position, the loading table is aligned with the spindle.
The bar can therefore be inserted into the spindle.
To ensure that the bar is always perfectly centered in the spindle, whatever its diameter, a motor (M2)
adjusts the height of the loading table automatically, as soon as the bar diameter is entered into the
parameters (see chapter 7).