Livezi Bravo H-DIG-18, Руководство по установке и пусконаладке

Страница: 49 / 56

49
8.7 Setting the Clock
1. Press or to select the global screen.
2. Press
CLOCK
to display the current time and date.
™
10:12 p Tu
Off
3. Use or to highlight “change time” then press
SET
.
4. Use or to alter the highlighted hours value then press
SET
.
5. Repeat for the minutes and day values.
6. Pressing
SET
after the day value will return you to the time clock summary screen.
7. Press
CLOCK
to exit and return to the zone summary screen.
8.8 Setting the System Timer Program
1. Press or to select the global screen.
2. Press
CLOCK
to display the clock.
3. Use or to highlight
ALL Zones program?
then press
SET
.
4. Use or to highlight desired program
A
or
B
then press
SET
.
5. The top line will scroll
Pro
g
ram ALL Zones
.
™
ram Da y s
sMTWTFs
6. On the bottom line the days of the week are displayed. A CAPITAL letter indicates that
the system on/off times will apply on that day. Press to activate, or to deactivate
each day, then press
SET
to move to the next day.
7. Press
SET
after the final day value to enter the start time. If no days have been
activated the configuration routine will exit at this point. If there are valid days the top
line will scroll
Pro
g
ram start: ALL Zones
.
s ta r t: A
0 8 :4
™
0 a m
8. Use or to alter the start time to the correct value (in 10 minute intervals).
9. Press
SET
to proceed to the stop time. The top line will scroll
Pro
g
ram sto
p
:
ALL Zones
.
™
s to p : AL
05:30 p m