Livezi Bravo H-DIG-18, Руководство по установке и пусконаладке

Страница: 8 / 56

8
Forward Curve VAV series Indoor Units
DIMEnSIOn H-VAV-7 H-VAV-11 H-VAV-15
Length 856 1200 1400
Width 808 808 808
Height 400 400 400
Weight 51 71 71
Supply Air 305 x 225 905 x 255 1105 x 255
Return Air 515 x 345 1000 x 345 1200 x 345
DIMEnSIOn H-VAV-18 H-VAV-22 H-VAV-26
Length 1400 1615 1615
Width 808 610 610
Height 400 490 490
Weight 84 94 94
Supply Air 1105 x 255 1325 x 305 1325 x 305
Return Air 1200 x 345 1400 x 417 1400 x 417
Notes
• All units split into two parts.
• Supply and Return air sizes are designed for Airtite series plenums.
• Field or installation wiring must be connected as per the connection diagram to ensure the unit performs as it is
designed.
• Installer / electrician is to ensure that when an external overload device is fitted, it be calibrated or set to the maximum
amp draw on the rating plate of the motor it is controlling.
2.2 Indoor Unit
• The indoor unit should be slung or mounted on anti-vibration devices, in a location capable
of supporting the weight of the unit.
• Provide sufficient clearance from the top and sides of the unit to enable servicing of the fan
motor, coil, etc.
• All drain pipes are to be lower than the unit base and to have at least a 50 mm “P” trap or
similar trap fitted.
2.2.1 Required Clearance for Indoor Units
SYSTEM MODELS H-VAV-7, 11, 15, 18, 22, 26
Direction
Required
Clearance
Indoor Unit Plan View
1
Return Air
N/A
2
Electrical Panel
500 mm
3
Supply Air
N/A
4
Side Fan Access
850 mm
5
Top Fan Access
500 mm