Livezi Bravo H-DIG-18, Руководство по установке и пусконаладке

Страница: 43 / 56

43
7.2 Turning all zones on or off ¤
1. Press
ZONE
or or until the global screen is displayed.
2. Press to turn all zones on or off as required.
General system information scrolls across the bottom line of the LCD when the system is on.
E.g.
Fan=80% Coolin
g
=60% Mode=Auto
7.3 Selecting the conditioning mode ¤
The mode of operation for the main air conditioning plant can be selected from global screen of
the LCD touchpads. The global screen can be identified by general system information scrolling
across the bottom line of the LCD.
E.g.
Fan=80% Coolin
g
=60% Mode=Auto
Auto
- selects heat or cool as required
Heat
- Heating only
Cool
- Cooling only
Vent
- Fan only - no heating or cooling
1. Press
MODE
to access the mode selection screen.
2. Use or to alter the mode.
3. Press
SET
to save and exit.
7.4 Selecting the Zone mode ¤
The mode of operation for individual zones can be selected from each zone screen of the LCD
touchpads. The zone screen can be identified by the actual zone name being displayed.
E.g.
Livin
g
3 )Off
Temp Set
- selects damper modulates to maintain target temperature
MotorSet
- provides manual damper positioning in 5% steps regardless of room
temperature.
1. Press
MODE
to access the mode selection screen.
2. Use or to alter the mode.
3. Press
SET
to save and exit.
7.5 Viewing a zones status ¤
1. Press
ZONE
or or to cycle from the global screen through each of the individual
zone status screens.
Livin
g
3 )Off
2. The current status of the selected zone is displayed on the second line of the LCD read-
out. If the zone is on the zone status scrolls across the bottom of the display.
E.g.
Setpoint=22.
5
°c
,
Temp=23.
0
°c