background image

6

CHaPTer 3: Preventative maintenance

Preventative maintenance is the key to smoothly operating equipment, as well as keeping the user’s liability to a minimum.  Equipment needs to be 

inspected at regular intervals.  Defective components must be replaced immediately.  Improperly working equipment must be kept out of use until it is 

repaired.  Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so.  

  

aFTer eaCH USe (daiLy)

Clean and inspect, following these steps:

Turn off the treadmill with the ON / OFF switch, then unplug the power cord at the wall outlet.  

• 

Wipe down the running belt, deck, motor cover, and console casing with a damp cloth.  Never use solvents, as they can cause damage to the 

• 

treadmill.  

Inspect the power cord.  If the power cord is damaged, contact Customer Technical Support.  

• 

Make sure the power cord is not underneath the treadmill or in any other area where it can become pinched or cut.  

• 

Check the tension and alignment of the running belt.  Make sure that the treadmill belt will not damage any other components on the treadmill by 

• 

being misaligned.  

If any labels are damaged or illegible, contact Customer Technical Support for replacements.  

• 

eVery WeeK (WeeKLy)

Clean underneath the treadmill following these steps:

Turn off the treadmill with the ON / OFF switch, then unplug the power cord at the wall outlet.  

• 

Fold the treadmill into the upright position, making sure that the lock latch is secured.  

• 

Move the treadmill to a remote location.  

• 

Wipe or vacuum any dust particles or other objects that may have accumulated underneath the treadmill.  

• 

Return the treamill to its previous position.  

• 

eVery mONTH - imPOrTaNT! 

Turn off the treadmill with the ON / OFF switch, then unplug the power cord at the wall outlet.  

• 

Inspect all assembly bolts of the machine for proper tightness.  

• 

Remove the motor cover.  Wait until ALL display screens turn off.  

• 

Clean the motor and lower board area to eliminate any lint or dust particles that may have accumulated.  Failure to do so may result in premature 

• 

failure of key electrical components.  

Vacuum and wipe down the belt with a damp cloth.  Vacuum any black / white particles that may accumulate around the unit.  These particles may 

• 

accumulate from normal treadmill use.  

3.1 PreVeNTaTiVe maiNTeNaNCe

eVery 6 mONTHS Or 150 miLeS

It is necessary to lubricate your treadmill running deck every six months 

or 150 miles to maintain optimal performance.  Your treadmill came with 

a bottle of lubricant which can be used for two applications.  If you need 

lubricant, contact Customer Technical Support.  Only use lubricant provided 

by Customer Technical Support.  

Turn off the treadmill with the ON / OFF switch, then unplug the power 

• 

cord at the wall outlet.  

Loosen both the rear roller bolts.  (For best results, place two remov-

• 

able marks on both sides of the frame to note roller position).  Once 

the  belt  is  loosened,  take  the  bottle  of  lubricant  and  apply  it  to  the 

entire top surface of the running deck (not the belt).  Tighten both rear 

roller bolts (matching up the marks for proper position) to the original 

position.   After  you  have  applied  lubricant,  plug  in  the  power  cord, 

insert the safety key, start the treadmill and walk on the belt for two 

minutes to spread the lubricant.  

If  your  treadmill  has  air  shocks,  lubricate  them  with  Teflon  based 

• 

spray.  

Contact  Customer  Technical  Support  with  questions  about  applying  the 

lubricant to your treadmill.  

Содержание LS9.9T


























Отзывы: