background image

19

6.4 TrOUBLeSHOOTiNG - NO SPeed FeedBaCK

erraTiC SPeed Or STOPPiNG SUddeNLy (e1 may Be PreSeNT)

1)  SYMPTOM:

       

 a.  The machine stops suddenly and displays an E1 Error Code 

          b.  The machine stops suddenly but the console is still counting.

          c.  The machine speed is erratic.    

2)  SOLUTION:

          a.  The MCB has lost the speed signal from the motor (normally an E1 will be present).   

               -  Remove the motor cover and check the connection of the speed sensor at the MCB.  

               -  Remove the sensor from the motor (Figure A) and clean it, then re-test.  

               -  If the speed sensor is clean and has a good connection but still will not operate, replace the speed sensor. 

 

          b.  The drive system has been interrupted.  

               -  Check that the drive belt is still around the drive belt and roller pulleys.  Re-align or replace the drive belt if needed.  

               -  Check the connection of the motor cable at the MCB.  

               -  Check to see if the motor spins freely.  If it will not, replace the motor.  

               -  If the motor spins freely and has a good connection, replace the MCB.  

          c.  The treadmill belt speed is lagging or erratic.  

               -  Check to see that the running belt is centered and has the correct tension (see Section 3.2).  

               -  Check the mileage in Engineering Mode (see Section 5.1) to see whether running deck lubrication is needed (see Section 3.1).  

               -  Check that the drive belt is still around the drive belt and roller pulleys.  Re-align or replace the drive belt if needed.  

               -  Check to see if the motor spins freely.  If it will not, replace the motor.  

               -  If the motor spins freely and has a good connection, replace the MCB. 

                

FiGUre a

CHaPTer 6: Troubleshooting

Содержание LS9.9T


























Отзывы: