15
CHaPTer 5: engineering mode
5.1 eNGiNeeriNG mOde
1) To enter Engineering Mode, press & hold the INCLINE UP and SPEED
DOWN keys (Figure A) at the same time for 3-5 seconds until Engineering
Menu appears on the display.
2) Use the INCLINE and SPEED UP and DOWN keys to select a param-
eter.
3) Press ENTER to enter a parameter setting.
4) Use the INCLINE and SPEED UP and DOWN keys to change the
parameter.
5) Press the START key to save the change to the parameter.
6) Press and hold the STOP key to exit Engineering Mode and return to
normal operation.
5.2 eNGiNeeriNG mOde OVerVieW
mOde
FUNCTiON
deSCriPTiON
ENG 0
Display Test
Start Key - LED on
Stop Key - LED off
Any Other Key - Will show on the display window.
Hold the STOP key for 3 seconds to return to the Engineering Menu.
ENG 1
Hardware Test
Motor & Incline Motor Test.
ENG 2
Auto Calibration
Auto calibrates the speed only.
ENG 3
Switch Function
Use the INCLINE or SPEED UP and DOWN keys to switch DEMO MODE off or on.
Use the START key to select unit (1=KM, 0=Mile).
ENG 4
Information
Accumulated Time and Distance
Press and hold the START key for 5 seconds to clear all data.
SECOND LEVEL
ENG 8
Software Version
To Get to ENG 8 - Enter into ENG 3, the press and hold the SPEED UP and INCLINE DOWN
key at the same time for 3-5 seconds.
Press ENTER at P0 - Software version.
Press ENTER at P1 - Select speed up rate (normal or quick).
Press ENTER at P3 - Hold the START key to clear all data.
FiGUre a
