Page 5.611
REVISION 14: MAJIK and WAKONDA
Sept 95
Copyright © 1995 by Linn Products Limited. All Rights Reserved.
5.
Fit the SNEAKY Aktiv module tray. Make sure the standoffs click into
position.Refit the screws in the back panel.
IMPORTANT: From March 1994 the SNEAKY AKTIV MODULE TRAY is
attached to the back panel by two MECH 001 bolts which fit into threaded
inserts in the module tray.
Please use the two MECH
001 bolts provided.
6.
Fit the plastic spacers to the
tray.
7.
Fit the 5 way connectors of
each wiring harness to the AKTIV modules.
Make sure that they are fully pressed home.
Identify the channel each board is wired to by ticking the appropriate box
on each board. Use a felt
pen.
8.
Fit the modules onto the tray.
The big screening cans are
fitted toward the tray.
Make sure the spacers click
into position.
INSTALLING AKTIV MODULES IN THE MAJIK- / WAKONDA
left
right
Remove Links !