![background image](http://html1.mh-extra.com/html/roland/mmp-2/mmp-2_supplementary-manual_1479249001.webp)
40457423 4*REC
About the Phantom Power of the MMP-2
Limitations and Conditions of Condenser Microphone
The phantom power source of MMP-2 can drive Condenser Microphones
with electrical specification 6.0mA or lower at 48V. Microphones that require
more ampere is not supported. Please use phantom power supply devices
separately.
Please see owner's manual of microphones regarding specification or
conditions of use.
About Input Jacks
Phantom power is not supplied to 1/4 inch TRS phone jacks. If your
microphone requires phantom power, please connect it to XLR jacks.
When Turning On/Off...
Please turn the volume of the audio mixer down (off) before switching
the phantom power function on/off on the MMP-2. This will prevent any
damage to your amp and speakers, as a loud noise will be output from the
MMP-2 when phantom power is switched on/off.