Page 5.612
REVISION 14: MAJIK and WAKONDA
Sept 95
Copyright © 1995 by Linn Products Limited. All Rights Reserved.
9.
Stick the correct identification label onto the lower left hand corner of the
SNEAKY Aktiv module tray.
10.
Remove the shorting links between the PRE-OUT and POWER-IN
Sockets.
11.
If the MAJIK is being used as the pre-amp in the system, fit 2 dust caps over
the POWER-IN sockets.
Alternatively, if the MAJIK is being used exclusively as the power-amp in
the system, fit 2 dust caps over the PRE-OUT sockets.
When the Aktiv cards are fitted in the SNEAKY slot they form the link between
the Pre-Amp and the Power -Amp sections of the Majik.
NEVER LINK THE PRE AND POWER SECTIONS EXTERNALLY (EITHER
DIRECT OR THROUGH ANOTHER POWER-AMP) WHEN AKTIV BOARDS
ARE FITTED AS DAMAGE WILL RESULT.
12.
Refit the sleeve.
INSTALLING AKTIV MODULES IN THE MAJIK- / WAKONDA
REMOVE
LINKS OR
BANG!!
LABEL