![background image](http://html1.mh-extra.com/html/shofar/headphone-amp/headphone-amp_user-manual_1259000001.webp)
SHOFAR User Manual
Thank you very much for purchasing SHOFAR.
SHOFAR HEADPHONE AMP in order to use
headphones or earphones or speakers must
have.
< Product components >
- SHOFAR HEADPHONE AMP
- USB Adapter
- USB Power line(DC 5V diameter 3.5MM)
- AUX Cable(length 1M)
The contents of this manual (hardware product configuration,
etc.) performance and other reasons the prior written consent
of the individual user or subject to change without notice.
Individual user, depending on the environment or the
constraints of the product performance and features you can
not use be. Failure or malfunction of the product can cause
loss of data or any user terminal about trying not responsible
for people who are deaf or hard-of-hearing or hearing loss in
at least two out of the periphery of use. This product includes
earphones, headphones, speakers, etc. are not included.
[Source terminal connection method]
INPUT Connectors:
AUX cable bundled with your smartphone or PC, and then connect to
the headphone jack side SHOFAR connects to the headphone
amplifier. (Text with stereo microphone IN terminal on the icon
displayed)
OUTPUT Connectors:
User has, earphones, headphones, speakers, output devices connected
to the side of the headphone amplifier output SHOFAR. (OUT jack
stereo headphone icon and text displayed)
**
Notice**
The AUX cable bundles are tied with a metal clip. Removal
can be hand there is a risk of injury. Attention Please.
[Power connection Method 1]
There are two power connection method.
DC 5V 1A Adapter:
Bundled DC 5V 1A power adapter to the power socket and
Connect the DC jack of the headphone amplifier SHOFAR.
After connecting the power switch to raise the direction of
the sky. Raising the direction of the power switch, the sky will
light the LED on the board SHOFAR .
After looking at the
inside of the tube 6922 is lit red light.
<DC 5V JACK>
Connect the DC cable to be provided.Be sure the adapter with 5V 1A Capacity use
3.5mm jack size.(Please provide as much as possible by using an adapter)
[Power connection Method 2]
Using a USB cable:
SHOFAR, bundled USB cable to the USB port connects to the side. After
connecting the power switch to raise the direction of the sky. Raising the direction
of the power switch, the sky will light the LED on the board SHOFAR . After
looking at the inside of the tube 6922 is lit red light.
This will support two modes at the same time, but during the two methods used
for one thing I hope the power connection.
**
Notice**
Tube warm-up time is between 10-20 seconds, and if the temperature is cold,
about 30-1 seconds warm-up time will be longer.
<USB Port>
The provided USB cable to the USB connector to the graphics card.
Kind of USB power from the PC and laptop battery power DC 5V DC
5V external power is available, also.
[Power ON/OFF]
The power switch is DOWN (ground direction) and the power OFF.
.
Anti-UP (sky direction) Raising ON..
**
Notice**
The power cable is connected and the power switch is ON, the volume that is
being zero lift. And power ON LED lights SHOFAR If you see a tube amp is
powered on.
And you will see a red light inside the tube.
Please,the power OFF
volume position 0. In order to use because of a long tube.
<Power switch>
The power switch to the UP (sky direction) to raise which ON andthen
the power switch to the down (ground direction) falls OFF.
[Volume control method]
Minimum which purchase is the first volume of SHOFAR (MIN) as applied.
After
application of the preceding process (input terminal connections -> output
terminal connections -> Power Connection) slowly turning the volume control
clockwise you will.
**
Notice**
Raising the maximum volume of long-term use can cause damage to hearing.
This product is used near the maximum volume of your iPhone or desktop
speakers and headphones can have the white noise from the speakers.
This is not
a malfunction of the product.
White noise is near the maximum sound volume
during playback, and have not recognized the sound source can be generated if
you do not play.In this regard, taking into account use.
<Volume control>
The table at the volume knob down (6 o'clock) towards silence when the volume
is turned clockwise increases. (The user can change the volume knob. Knob to suit
the user's preferences can be used interchangeably.)
<
INPUT Connectors>
AUX Cable to connector
to input jack.
<OUTPUT Connectors>
User has headphones
and earphones, connect
the speakers.