Linksys WPSM54G - Wireless-G PrintServer With Multifunction Printer Support Print Server, Руководство пользователя

Страница: 10 / 245

Chapter 3
Advanced Configuration
7
Wireless-G PrintServer
In most cases, the Gateway IP address is the IP address
of your router, and you should complete the Gateway
field if you will use the PrintServer for Internet printing .
(To find out your router’s IP address, refer to your router’s
documentation .)
Connection
Delay before reconnection attempt
Set how long,
in seconds, you want the PrintServer to wait between
attempts .
Number of reconnection attempts
Specify the number
of times that the PrintServer will attempt to connect to
the network .
Click the
Save
button to apply your changes, or click the
Cancel
button to cancel your changes .
Protocol > SNMP
Use this screen to view or change the PrintServer’s SNMP
(Simple Network Management Protocol) settings .
The PrintServer supports SNMP, which allows network
administrators to monitor and control the PrintServer
through the use of network management platforms, such
as HP OpenView .
The appropriate MIB file must be imported into your
SNMP management program using the Import-Compile
command . Check your program’s documentation for
details on this procedure . The MIB file is named Mib2p .mib
and is provided in the MIB folder on the Setup CD-ROM .
Protocol > SNMP
General
SysContact Enter the name of the contact person .
SysLocation Enter the location of the contact person .
Management Stations
Station No. Select the number of the management
station (1-4) . Click the Get Data button to display the
information for the selected station .
IP Address Enter the IP address of the management
station running the SNMP program .
Community Enter the name of the SNMP community,
which is usually public or private .
Access
Select the level of access for this management
station:
Not Accessible
,
Read-only
, or
Read/Write
.
Trap Receivers
Receiver No. Select the number of the trap receiver (1-4) .
Click the Get Data button to display the information for
the selected trap receiver .
IP Address Enter the IP address of the trap receiver that
will be sent the trap messages or notifications .
Community
Enter the name of the SNMP community,
which is usually public or private .
Enable with Severity level
To designate a severity level,
select this option . From the drop-down menu, select the
desired level of severity, with 1 being least severe .
Click the
Save
button to apply your changes, or click the
Cancel
button to cancel your changes .
Wireless > Basic
This screen allows you to change the PrintServer’s basic
wireless settings .
Wireless > Basic
Configuration
Regulatory Domain and MAC Address The PrintServer’s
Regulatory Domain and MAC Address are listed and
cannot be changed .
SSID Enter the name of your wireless network . This is the
unique name shared by all devices in a wireless network .
The SSID is case-sensitive and should have 32 or fewer
characters .
Channel No. If your network is set to ad-hoc mode, select
your network’s channel setting . If your network is set to
infrastructure mode, keep the default, Auto .