32
The sentida 03 is equipped with a spiral cable. A plastic hook is attached to the spiral cable.
•
If you want to move the sentida 03, hang the power supply connection cable´s hook to the
upper edge of the head end. Thus, you can avoid that the power supply connection cable is
run over.
•
Regularly check the power supply connection cable, the correct insertion of the power plug,
the power plug cover and the housing openings on the bed for signs of damage, in order to
rule out hazards. Where the integrity of the external protective conductor in the installation
or its arrangement is in doubt operate the bed from internal battery only.
6.2 Mechanically adjusting calf section
The height of the calf section can be adjusted by using ratchets.
•
If you want to raise the calf section manually, hold it on the frame and lift it.
It clicks into the desired position.
•
If you want to lower the calf section manually, hold it on the frame, lift as high as possible and
then lower it.
Ensure that both sides of the calf rest are pulled as far as the stop.