LINDY ELECTRONICS LTD
Installation & Use – English Guide
Page 27
4.4 Autoscan ‘lock on’ mode and delay time
LINDY CPU Switch can be set to select each channel in turn for a period of time set by the
Autoscan delay time. Autoscan mode is entered by typing the hotkey keys together with
$
. By
default, only those channels which have a powered up computer connected to them will be
scanned. Sometimes it may be desirable to scan all channels, even if the attached computer is
switched off (this will simply show a blank screen when it is selected). All the LINDY CPU Switch’s
ports will be scanned if option L2 is selected. Some applications may also require the LINDY CPU
Switch to power on in autoscan mode. This feature can be selected using the L3 or L4 options.
KEYS
CONFIGURATION DESCRIPTION
CPU
2
CPU
4
CPU
4 OSD
CPU
8 OSD
CPU
16 OSD
/
LINDY CPU Switch locks on to active ports only during autoscanning (default)
Yes
Yes
Yes
Yes
Yes
/
LINDY CPU Switch locks on to every port during autoscanning
Yes
Yes
Yes
Yes
Yes
/
LINDY CPU Switch powers on in autoscan mode & locks on to active ports only
Yes
Yes
Yes
Yes
Yes
/
LINDY CPU Switch powers on in autoscan mode and locks on to all ports
Yes
Yes
Yes
Yes
Yes
7
2 seconds autoscan delay time before switching to next port (default)
Yes
Yes
Yes
Yes
Yes
7
5 seconds autoscan delay time before switching to next port
Yes
Yes
Yes
Yes
Yes
7
7 seconds autoscan delay time before switching to next port
Yes
Yes
Yes
Yes
Yes
7
10 seconds autoscan delay time before switching to next port
Yes
Yes
Yes
Yes
Yes
7
15 seconds autoscan delay time before switching to next port
Yes
Yes
Yes
Yes
Yes
7
20 seconds autoscan delay time before switching to next port
Yes
Yes
Yes
Yes
Yes
7
30 seconds autoscan delay time before switching to next port
Yes
Yes
Yes
Yes
Yes
7
60 seconds autoscan delay time before switching to next port
Yes
Yes
Yes
Yes
Yes
NOTE: Autoscan mode is ended simply by selecting a fixed channel using the on-screen menu,
the keypad, the keyboard hotkeys or the mouse.
Many modern monitors are fitted with automatic power save relays and will switch off after a few
seconds if connected to an inactive PC. If you are using such a monitor you must not use the L2
feature. Constant switching on and off of your monitor's relay will eventually damage your
monitor.
