LINDY ELECTRONICS LTD
Installation & Use – English Guide
Page 31
4.9 Setting a security password
There are many situations where unrestricted access to corporate file servers or sensitive
information needs to be controlled. In such circumstances, the LINDY CPU Switch can be locked
away in a room or secure cabinet and controlled remotely. In this mode typing the keyboard
hotkeys together with 0 will blank the screen, disconnect the keyboard and mouse from all of the
computers and display ‘P’ on the LINDY CPU Switch display. Control can only be regained by
typing the correct password on the keyboard.
To set the password in configure mode, first type
3
then <ENTER>. The display on the LINDY
CPU Switch will change to show ‘=‘ and you can then type your password. The password is not
case sensitive and can be any combination of key strokes, including the function keys, but
excluding the
t
,
s
,
u
and <ENTER> keys. When you have typed in your password type
<ENTER> to register it in the stored memory. Do not worry if you type the password incorrectly,
you can always re-enter configure mode and set the password again.
NOTE - The password consists of a combination of key strokes rather like the code to a safe. The
key strokes are not case sensitive and can include all the keys on the keyboard (except
t
,
s
,
u
and <ENTER>). Consequently the following 'password' would be valid:
e)5('
4.10 Exit configure mode
When you have finished configuring any special options, simply type
(
followed by <ENTER> to
exit configure mode and return to normal operation mode. The attached computers can now be
switched on.
