LINDY ELECTRONICS LTD
Installation & Use – English Guide
Page 29
Standard PS/2 and IntelliMouse compatible mice can be connected to control ports A and B in any
combination. You may configure your CPUs using Microsoft PS/2 or IntelliMouse drivers in any
combination as required. The IntelliMouse features are supported on both PS/2 and RS232 CPU
connections. When using PS/2 CPU connections, the LINDY CPU Switch will automatically
configure itself to the type of mouse requested by the driver. If you are using RS232 CPU
connections then you will need to select mouse options U4 or U5 to enable the IntelliMouse
features.
KEYS
CONFIGURATION DESCRIPTION
CPU
2
CPU
4
CPU
4 OSD
CPU
8 OSD
CPU
16 OSD
8
LINDY CPU Switch channels are switchable using a 3 button mouse or
IntelliMouse (default)(LINDY CPU Switch reports 2 button mouse mode to PCs)
Yes Yes Yes Yes Yes
8
LINDY CPU Switch channels are not switchable using 3 button mouse or
IntelliMouse (LINDY CPU Switch reports 2 button mouse mode to PCs)
Yes Yes Yes Yes Yes
8
LINDY CPU Switch channels are not switchable using 3 button mouse or
IntelliMouse (LINDY CPU Switch reports 3 button mouse mode to PCs)
Yes Yes Yes Yes Yes
8
LINDY CPU Switch channels are switchable using 3 button mouse or
IntelliMouse (LINDY CPU Switch reports IntelliMouse mode to PCs)
Yes Yes Yes Yes Yes
8
LINDY CPU Switch channels are not switchable using 3 button mouse or
IntelliMouse (LINDY CPU Switch reports IntelliMouse mode to PCs)
Yes Yes Yes Yes Yes
4.7 Keyboard hotkey combination
The keyboard hotkey combination is used to change a channel, set autoscan mode or secure the
product (so that the password needs to be typed before it can be used again). The following
keyboard hotkey combinations can be selected. These hotkey combinations are used together with
the command keys to trigger the required LINDY CPU Switch function. The left and right shift key
combination is particularly suitable for extended keyboards where additional keys can be
programmed to act as a combination of other keys. Such keyboards are supplied with many
Gateway 2000 computers. Programming spare keys to trigger the hotkey combination allows
channels to be selected via a single key stroke.
KEYS
CONFIGURATION DESCRIPTION
CPU
2
CPU
4
CPU
4 OSD
CPU
8 OSD
CPU
16 OSD
+ t
and
s
keys together (left or right hand keys operate) (default)
Yes Yes Yes Yes Yes
+ t
and
u
keys together (left or right hand keys operate)
Yes Yes Yes Yes Yes
+ s
and
u
keys together (left or right hand keys operate)
Yes Yes Yes Yes Yes
+
RIGHT
s
key
Yes Yes Yes Yes Yes
+
LEFT
s
and RIGHT
s
keys together
Yes Yes Yes Yes Yes
+
LEFT
t
and LEFT
s
keys together
Yes Yes Yes Yes Yes
+
RIGHT
t
and RIGHT
s
keys together
Yes Yes Yes Yes Yes
+
No hotkey enabled
Yes
Yes
Yes
Yes
Yes
