Limbic Media Aurora Pro, Руководство пользователя

Страница: 22 / 56

22
5. Connect the USB-to-Ethernet adapter to the NDB via Cat 5/6 network cable.
6. Connect leader cables to each NDB port.
7. Connect LED pixel strands to each leader cable (or to each NDB port if leader
cables are not in use).
8. Power Aurora Pro and the NDB power supply ON. NDBs must be powered
ON either before or at the same time as Aurora Pro to load configuration data
properly. NDBs cannot be powered ON after Aurora Pro.
9. Connect an audio input to Aurora Pro and calibrate audio using the Aurora
Mobile App Audio Settings. Refer to Connect and Calibrate Audio Inputs for
details.
10. Refer to Configure the Aurora Mobile App to begin customizing your light
show.
Set up Aurora Pro with Multiple Network Distribution Boxes (NDBs)
Using multiple Network Distribution Boxes (NDBs) increases the number of LED
pixels supported by Aurora Pro up to 25,000 LED pixels. A single NDB supports
1000 LED pixels maximum. Each NDB port supports 100 LED pixels (or 80 LED
pixels of Triklit-style fixtures). To achieve 25,000 LED pixels, for example, 25 NDBs
are required.
Power Top-Ups are required to extend the LED pixels per port limit beyond 80-100.
Refer to Set up Aurora Pro with Network Distribution Boxes (NDBs) and Power
Top-Ups for details.
NDB
Cat 5/6 Network Cables
Audio Interface
NDB Power Supply
USB-to-Ethernet
Adapter
Leader Cables
Network
Switch
NDB
⅛” IN/THRU
¼” TRS/XLR IN/THRU
Fig. 12: Aurora Pro with multiple NDBs