Limbic Media Aurora Pro, Руководство пользователя

Страница: 18 / 56

18
Method
1. Connect an NDB to your computer via Cat 5/6 network cable and power the
NDB ON.
2. Set your computer’s IP address to match the NDB, except for the last number.
Unless NDBs have been previously reconfigured, their default IP address
should be 10.0.0.100—so setting your computer’s IP address to 10.0.0.2, for
example, should work. Set the netmask to 255.255.255.0, and the gateway (if
present) to 10.0.0.1 (Fig. 8)
3. Open a web browser and connect to the default NDB IP address
http://10.0.0.100 to open the NDB configuration page. If the NDB was previously
reconfigured to a different IP address, connect to that IP address instead. NDBs
must be powered ON for the NDB configuration page to appear.
4. Keep the netmask set to 255.255.255.0, and the gateway to 10.0.0.1 (Fig. 9)
Fig. 8: Adjusting network settings on a Mac laptop. Other network settings screens may differ.
Pro-Tip:
If the NDB IP address has been changed, but you have no record of what the
new IP address is, refer to Reset an NDB to restore the default IP address