Limbic Media Aurora Pro, Руководство пользователя

Страница: 31 / 56

31
CONNECT AND CALIBRATE AUDIO INPUTS
Connect Audio Inputs
Aurora Pro creates light shows in real-time from incoming audio. There are multiple
ways to send audio input to Aurora Pro.
Connect Consumer-Level Speakers and Audio Devices
The ⅛” IN/THRU (IN 1 THRU
10
1) connects consumer-level speakers and audio
devices to Aurora Pro.
Pro-Tip:
Individual shows cannot be saved separately. Existing cues must be deleted to
create a new show.
Pro-Tip:
Only the left channel of a stereo 1⁄8” audio cable is sent to Aurora’s audio
analysis system.
Pro-Tip:
Press the next mode/pattern button (NXT) on Aurora Pro’s connector interface
to cycle through patterns in Live Control Mode and Show Mode. Press and
hold the next mode/pattern button (NXT) for 5 seconds to switch Aurora Pro
between Live Control Mode or to move to the next cue in Show Mode.
Fig. 26: Aurora Pro with ⅛” IN/THRU (IN 1 THRU 1) audio connected
10
THRU is labeled OUT on older models of Aurora