Limbic Media Aurora Pro, Руководство пользователя

Страница: 8 / 56

8
AURORA PRO CONNECTOR INTERFACE
The Aurora Pro connector interface is complete with multiple audio inputs/outputs,
built-in RGB connectors and buttons. Some of Aurora Pro’s functionality can be
accessed directly from the connector interface.
Fig. 1: Aurora Pro Connector Interface
1. Power connector
The power connector is located at the top left of the front panel. This connects
Aurora Pro to AC power via an IEC power cable.
2. Built-in RGB connectors
Aurora Pro comes with 8 built-in RGB LED connectors numbered ports 1-8. Refer to
the Aurora Product Guide for a catalog of available LED fixtures and accessories.
3. Reset button
The reset button restores Aurora Pro to its default system settings. A paper clip or
pin is required to press the button.
4. USB A connectors
Two USB A connectors connect a USB audio interface, USB-to-Ethernet adapter, or
USB data stick to Aurora Pro.
5. USB micro B connectors
The USB micro B connector is used to update Aurora Pro firmware.
1
2
4
3
6
7
8
9
10
11
5
1. Power connector
2. Built-in RGB connectors
3. Reset button
4. USB A connectors
5. USB micro B connectors
6. Audio select button (SEL) and status LEDs 7. ⅛” IN/THRU
2
audio jack (IN 1 THRU
2
1)
8. ¼” TRS/XLR combo jack IN/THRU
2
(IN 2 THRU
2
2)
9. Next mode/pattern (NXT) and status LED
10. Channel select dip switch (CHANNEL SEL)
11. DMX IN OUT/THRU
2
(IN OUT/THRU)
2
THRU is labeled OUT on older models of Aurora