Lika CKP58, Руководство пользователя, Страница: 7 / 44

Preliminary information
This guide is designed to provide the most complete and exhaustive information the operator needs to
correctly and safely install and operate the following
programmable incremental encoders
:
•
IP58, IP58S;
•
CKP58, CKP59, CKP60;
•
IQ58, IQ58S;
•
CKQ58, CKQ59, CKQ60;
•
IQ36;
•
CKQ36.
IP58 / IQ58 / IQ36 programmable encoders from Lika Electronic are designed to maximize customization
and versatility and really allow the operator to get, along with the position information, a complete
parametrization and the better configuration that perfectly suit specific needs in a good many
applications and machines. The operator in fact can not only configure the desired resolution or set the
point in the revolution at which the 0 signal is output, but also choose for instance the voltage level of A,
B and 0 output channels.
IP58 / IQ58 / IQ36 programmable encoders are available in both solid (IP58, IP58S, IQ58, IQ58S, IQ36) and
hollow (CKP58; CKP59; CKP60, CKQ58, CKQ59, CKQ60, CKQ36) shaft versions.
The parametrization and set up of IP58 / IQ58 / IQ36 programmable encoders is achieved through a
software expressly developed and released by Lika Electronic. The program is supplied for free and can be
installed in any PC fitted with a Windows operating system (Windows XP or later). It allows the operator
to set the working parameters of the device and monitor whether the device is running properly. The
connection between the encoder and the PC is established by using the USB connection kit order code
KIT IP/IQ58
provided by Lika Electronic; ZCW connection devices only need the kit; ZCZ connection
devices need the kit to be matched with EC-IP/IQ-M23 order code cordset (only available for IP58 and
IQ58 series); ZCM connection devices need the kit to be matched with EC-IP/IQ-M12 order code
cordset.
To make it easier to read and understand the text, this guide is divided into two main sections.
In the first section some general information concerning the safety, the mechanical installation and the
electrical connection as well as tips for setting up and running properly and efficiently the unit are
provided.
In the second section, entitled
Programming Interface
, both general and specific information is given
on the programming interface. In this section the software tool features and the parameters
implemented in the unit are fully described.