Lika CKP58, Руководство пользователя, Страница: 30 / 44

IP58, IQ58, IQ36
needful for checking the work status of the encoder and entering the
diagnostic information page can be found below in this section.
5.3 Connection with the encoder
When you start the program, the system automatically recognizes the type of
interface you plugged into (
INTERFACE TYPE
: “KIT IP58” or “KIT IP/IQ58”). No
action is required.
You must select the series of the encoder you need to connect to instead. To do
this open the
ENCODER
drop-down box and select from the options in the list:
“IP58, IP58S, CKP58” or “IQ58, IQ58S, CKQ58” or “IQ36, CKQ36”. The encoder
model can be found in the label applied to the device enclosure.
If the connection is established properly, a green tick appears next to both
the CONNECT buttons; on the contrary, if the program is not able to establish a
MAN IP58_IQ58_IQ36 E 1.6 Programming interface 30 / 44