Lika CKP58, Руководство пользователя, Страница: 29 / 44

IP58, IQ58, IQ36
NOTE
Before starting the program and establishing a communication with the device,
it is necessary to connect it to the personal computer. The interface is a I
2 C
(Inter Integrated Circuit) serial interface. To communicate with the encoder, you
must connect the device to the personal computer through a USB port using
the specific connection kit order code
KIT IP/IQ58 supplied by Lika Electronic.
For any further information please refer to the “4.12 I2C (Inter Integrated
Circuit) serial connection” section on page 25.
WARNING
Please make sure that only one encoder is connected to the KIT IP/IQ58 when
you activate the USB connection !
WARNING
Please always close the programming interface before disconnecting the
encoder !
5.2 Starting the program
To launch the program just double-click the KIT IP_IQ58_vx.x.EXE executable
file.
The main page of the configuration interface will appear on the screen. A
further page is dedicated to the diagnostic information; it can be accessed by
pressing the
ADVANCED DIAGNOSTICS
button below in the page (see on page
39).
First of all the main page allows the operator to choose the language used to
display texts and items in the user interface. Click the
Italian flag
icon
at the top-right of the page to choose the Italian language; click the
UK flag
icon to choose the English language.
Two sections can be found in the main page of the configuration interface:
1. a top section groups the items needful for establishing the connection
between the encoder and the interface, the connection buttons as well
as the drop-down boxes designed to select the interface type and the
series of the encoder to connect;
2. a bottom section called PROGRAMMABLE PARAMETERS shows the list of
the parameters to be used to program the encoder; also the buttons
MAN IP58_IQ58_IQ36 E 1.6 Programming interface 29 / 44